Table of Contents
Advertisement
Record Output
STEP 7- CONSOLE RECORD OUTPUT
The console AUDITION output (AUD) is usually the bus that is used for recording. By using the Audition bus for recording, a recording can be occurring at the
same time as the Program bus is used On Air. If you want to record the On Air signal on the Program bus, simply assign all of the channels in PGM also to
AUD.
The Audition output connectors are located on the console back panel. It is an unbalanced (-10dBu) audio output.
CONNECTING TO AN AUDIO RECORDER
Most audio recorders will directly connect to consumer type unbalanced sources such as the Audition (Record) output of the console. Connect to the record-
er with the analog cable supplied with the recorder.
TEST
Once connected, send audio from the console output to the recorder and view the input signal on the recorder. Refer to the recorder manual for more infor-
mation.
RCA AUDIO CABLE
The Black con-
nector is right
and the Red con-
nector is left
STEP 7- ANALOG AUDITION (RECORD) OUTPUT
Cue
Ch 14
Air
Mon
PMM
ARC-15BP
L
L
L
Headphone
RS232
R
R
R
Logic
In
DC Power
In
In
Out
AMM
I N S T A L L A T I O N I N S T R U C T I O N S
Aud
Pgm
Phone Logic
Pgm Left
Pgm Rght
Phone
Ch 15 Phone
L
L
R
R
Ground
Out
Out
In
Out
Out
Out
Back panel Diagram for ARC-15BP console
EXAMPLE: MARANTZ CD RECORDER
Ch 14
Ch 13
Ch 12
Ch 11
Ch 10
Ch 9
Ch 8
Mic Ch 5
Mic Ch 4
PC
48V
USB
pwr
In
In
4.8
Ch 7
Ch 6
Ch 5
Ch 4
Ch3
Ch 2
Mic Ch 3
Mic Ch 2
In
In
Mic Ch 1
Arrakis
Systems
In
Advertisement
Table of Contents
