The console AUDITION output (AUD) is usually the bus that is used for recording. By using the Audition bus for recording, a recording can be occurring at the
same time as the Program bus is used On Air. If you want to record the On Air signal on the Program bus, simply assign all of the channels in PGM also to
AUD.
The Audition output connectors are located on the console back panel. It is an unbalanced (-10dBu) audio output.
CONNECTING TO AN AUDIO RECORDER
Most audio recorders will directly connect to consumer type unbalanced sources such as the Audition (Record) output of the console. Connect to the record-
er with the analog cable supplied with the recorder.
TEST
Once connected, send audio from the console output to the recorder and view the input signal on the recorder. Refer to the recorder manual for more infor-