Table of Contents
Advertisement
Step by Step Instructions
IMPORTANT
- Follow this STEP by STEP procedure. Each STEP has specific tests to determine if the console installation
has been performed correctly to that point.
a) STEP 1- POWER SUPPLY INSTALLATION
The console power supply should be plugged into a surge protected outlet. First plug the power supply into the back of the console and then plug the
power supply into the AC outlet.
TEST- The console should now be on. To test for power, simply push one of the console On/off switches to see that the Channel On LED lights.
b) STEP 2- CONNECT AN AUDIO SOURCE
Select a single audio source such as a CD player. Choose a console channel for the source (such as Channel 6), and connect the audio source to the
console with a stereo audio cable.
On the channel that you have chosen for the source (such as channel 3), turn the channel on by pushing the red on button(the red on LED
should now be on), and bring the slide fader on that channel to the in hand setting (0).
Insert a CD into the CD player and push the Play button on the CD player to begin play.
TEST- The VU meters on the console should move as the CD plays a song.
c) STEP 3- LISTEN TO AUDIO ON HEADPHONES
Plug the headphones into the headphone jack on the back right side of the console as illustrated. The console supports both low impedance (8 ohm) and high
impedance (>20 ohm) headphones. Play a CD as in Step 2. Select PGM on the Monitor Select Switch. Adjust the headphone level control on the console to a
comfortable audio level.
TEST- You should hear the song on the CD clearly. There should be no audible hum or noise. If you hear no audio or there is hum or noise, then repeat Steps
1,2,&3.
STEP 3- PLUG IN
HEADPHONES TO LISTEN
Plug in a pair
of high impedance
headphones and listen
to the CD player
Ch 14
Air
Mon
PMM
Cue
ARC-15BP
L
L
L
Headphone
RS232
R
R
R
In
Logic
DC Power
In
In
Out
AMM
I N S T A L L A T I O N I N S T R U C T I O N S
STEP 1- CONNECT THE
AC POWER SUPPLY
Aud
Pgm
Phone Logic
Pgm Left
Pgm Rght
Phone
Ch 15 Phone
L
L
R
R
Ground
Out
Out
Out
Out
Out
In
Back panel Diagram for ARC-15BP console
Ch 14
Ch 13
Ch 12
Ch 11
Ch 10
Ch 9
Ch 8
Mic Ch 5
Mic Ch 4
PC
48V
USB
pwr
In
In
4.4
STEP 2- CONNECT AN AUDIO SOURCE
Connect a CD player to
Channel 6 on the console
Ch 7
Ch 6
Ch 5
Ch 4
Ch3
Ch 2
Mic Ch 3
Mic Ch 2
In
In
Mic Ch 1
Arrakis
Systems
In
Advertisement
Table of Contents
