Table of Contents
Advertisement
Console Logic
The DB-15 connector on the rear panel of the console has the logic & audio signals required for support-
ing a talk studio and controlling the starting & stopping of sources.
Sample interface circuits for control are illustrated in 4.15.
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
I N S T A L L A T I O N I N S T R U C T I O N S
IMPORTANT- improper connection to console logic can damage the console.
DB15 CONNECTOR PINOUT (Solder Cup)
8 7 6 5 4 3 2 1
15 14 13 12 11 10 9
CONSOLE BACK PANEL VIEW
DESCRIPTION
Control Room Mute Logic (will switch to Pin 13 ground)
Autocue Logic In (switch to ground to turn on)
Channel Eight Logic (+12VDC channel on, 0VDC channel off)
Channel Seven Logic (+12VDC channel on, 0VDC channel off)
Channel Six Logic (+12VDC channel on, 0VDC channel off)
Channel Five Logic (+12VDC channel on, 0VDC channel off)
Channel Four Logic (+12VDC channel on, 0VDC channel off)
Channel 3 Logic (+12VDC channel on, 0VDC channel off)
Channel 10 Logic (+12VDC channel on, 0VDC channel off)
Studio Monitor Left Audio Output
Studio Monitor Right Audio Output
Talkback audio from Mic 1 and Mic 2
Ground
+ 12 VDC
Talkback Audio Input to Cue
4.14
Advertisement
Table of Contents
