Table of Contents
Advertisement
Stereo Line Level Input Channels
On the ARC-15, channels 6-13 are stereo line level channels. Channel 2-5 are internally selectable as mic or stereo line chan-
nels.
CHANNEL ON AND OFF
To turn a channel on, simply push the red ON switch at the bottom of the fader. When the channel is on, the switch will be lighted. To turn the channel off, simply
push the red ON button again.
CHANNEL ON AND OFF LOGIC
The line level output channels have a logic control output on the REMOTE LOGIC connector. That logic line can be made to remotely turn the channel on & off or to
remotely start and stop the audio source connected to the channel when the channel is turned on or off.
PROGRAM AND AUDITION BUS ASSIGNMENT
The green PGM and AUD buttons above the slide fader assign the channel to either (or both) of the main audio mixing buses: Program & Audition. Push the button
once to light the button and assign it to the bus. Push the lighted button again to unassign the channel from the bus.
CUE
To activate cue, click on the yellow CUE button above the fader. To exit the cue mode, click on the CUE button again.
Cue audio will be heard in the speaker in the VU meter housing and in the Headphones. Cue logic automatically switches the Headphones from the selected audio
source to the cue audio bus whenever any channel is placed into cue.
Program Bus
Assignment
Audition Bus
Assignment
Cue Bus
Assignment
Slide fader
Level control
Channel
On switch
O P E R A T I N G I N S T R U C T I O N S
CHANNELS 6-13 ARE
STEREO LINE LEVEL
Cue
3.3
STEREO LINE LEVEL OR
CHANNELS
AN OPTIONAL PC INPUT
CHANNEL 14 IS
Advertisement
Table of Contents
