Table of Contents
Advertisement
Mono mic level Input Channel
Channels one is a dedicated mono microphone channel for the console operator. Channels 2-5 are selectable to
be either mono mic level or stereo line level channels. The selection is by internal jumpers on the individual chan-
nels. The console can therefore support just a single mic for the console operator or a talk studio with a host and
three guests.
CHANNEL ON AND OFF
To turn a channel on, simply push the red ON switch at the bottom of the fader. When the channel is on, the switch will be lighted. To
turn the channel off, simply push the red ON button again.
CHANNEL ON AND OFF LOGIC
Channels One and Two are assumed to be located in the control room and therefore do not require remote channel on/off logic.
PROGRAM AND AUDITION BUS ASSIGNMENT
The green PGM and AUD buttons above the slide fader assign the channel to either (or both) of the main audio mixing buses: Program
& Audition. Push the button once to light the button and assign it to the bus. Push the lighted button again to unassign the channel
from the bus.
.
Audition Bus
Assignment
Talk
Assignment
Slide fader
Level control
On switch
O P E R A T I N G I N S T R U C T I O N S
CHANNELS 2-5 ARE SELECTABLE AS MONO
MIC OR STEREO LINE LEVEL CHANNELS
Program Bus
Assignment
Channel
(channel2-5)
Cue
3.2
Advertisement
Table of Contents
