Table of Contents
Advertisement
Mono mic level Input Channel
Channels one is a dedicated mono microphone channel for the console operator.
CHANNEL ON AND OFF
To turn a channel on, simply push the red ON switch at the bottom of the fader. When the channel is on, the switch will be lighted. To
turn the channel off, simply push the red ON button again.
CHANNEL ON AND OFF LOGIC
Channels One and Two are assumed to be located in the control room and therefore do not require remote channel on/off logic.
PROGRAM AND AUDITION BUS ASSIGNMENT
The green PGM and AUD buttons above the slide fader assign the channel to either (or both) of the main audio mixing buses: Program
& Audition. Push the button once to light the button and assign it to the bus. Push the lighted button again to unassign the channel
from the bus.
TALKBACK
Talkback is a simple 2 way intercom system to communicate with another studio such as an Announce booth, Interview room, News
room, or Production studio.
The ARC-15 has an audio output from the control room microphone that can be connected into a console in another studio. The ARC-
15 has an audio input into the cue system for the other studio to talk to the ARC-15 console.
To activate talkback, simply cick on the red 'Talk' switch. To exit the talkback mode, click on the 'Talk' button again.
Audition Bus
Assignment
Talk
Assignment
Slide fader
Level control
On switch
O P E R A T I N G I N S T R U C T I O N S
Program Bus
Assignment
Channel
(channel 1)
CHANNEL 1 IS
MONO MIC LEVEL CHANNELS
Cue
3.2
Advertisement
Table of Contents
