Table of Contents
Advertisement
INTRODUCTION
The CT-930CH and CT-940CH Remote Hydraulic Crimping Tools are used in conjunction with a compatible hydraulic
pump system capable of sustaining 10,000 PSI (700 kg/cm
Pump and CT-900HPH 10 foot Hydraulic Hose.
• The CT-930CH and CT-901HP Hydraulic Pump System can crimp #8 AWG thru 750 kcmil PANDUIT Copper
Compression Connectors and #6 AWG thru 600 kcmil PANDUIT Aluminum Compression Connectors. PANDUIT' s
CT-930CH Tool develops up to 14 tons (12.7 metric tons) of compressive force.
• The CT-930LPCH Remote Hydraulic Crimping Tool is used in conjunction with a compatible hydraulic pump system
capable of sustaining 7,500 PSI (525 kg/cm
CT-900LPHPH 10-foot Hydraulic Hose. The CT-930LPCH and CT-8250HP Hydraulic Pump system can crimp #8 AWG
thru 250 kcmil PANDUIT Copper Compression Connectors for use with stranded copper code cable. The CT-930LPCH
Tool develops up to 10 tons (9 metric tons) of compressive force.
• The CT-940CH and CT-901HP Hydraulic Pump System can crimp #8 AWG thru 1500 kcmil PANDUIT Copper
Compression Connectors and #6 AWG thru 1000 kcmil PANDUIT Aluminum Compression Connectors. The CT-940CH
Tool develops up to 15.0 tons (13.6 metric tons) of compressive force.
This manual will guide you step-by-step in the operation and maintenance of your
Remote Hydraulic Crimping Tool. If you have problems not covered, call:
The information contained in this literature is based on our experience to date and is believed to be reliable. It
is intended as a guide for use by persons having technical skill at their own discretion and risk. We do not
guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are
for reference purposes only. For specific dimensional requirements consult the factory. This publication is not
to be taken as a license to operate under, or a recommendation to infringe any existing patents. This super-
sedes and voids all previous literature, etc.
SYSTEM SPECIFICATIONS
CT-930CH
Hydraulic Crimping Tool
Carrying Case
CT-930CH, CT-930LPCH and CT-940CH OPERATING INSTRUCTIONS
2
). PANDUIT recommends using their CT-8250HP Hydraulic Pump and
1-888-506-5400, ext. 3255
Ask for one of our Tool Service Technicians
Output:
Input:
Applicable Range:
Dimensions:
Weight:
Hydraulic Fittings:
Included with CT-930CH Tool
2
). PANDUIT recommends using their CT-901HP Hydraulic
14 Tons / (12.7 metric tons)
10,000 PSI / (700-kg/cm
by a separate hydraulic pump system ( PANDUIT' s
CT-901HP Hydraulic Pump and CT-900HPH 10-foot
Hydraulic Hose).
#8 AWG to 750 kcmil copper and #6 to 600 kcmil alu-
minum PANDUIT compression connectors.
12-3/4" L x 5" H x 3" W
324 L x 124 H x 76 W (mm)
11 lbs. / (5 kg)
Parker-Hannifin 3/8" Female Quick Coupler
Page: 1 of 6
2)
hydraulic pressure provided
Advertisement
Table of Contents
