Table of Contents
Advertisement
© Panduit Corp. 2014
INTRODUCTION
The CT-2500 and CT-2500/E Battery Operated Crimping Tools can crimp #10 AWG thru #22 AWG
Panduit terminals, disconnects and splices. The Battery Operated Crimping Tool develops up to 1.7
tons (15kN) of compressive force.
This manual will guide you step-by-step in the set-up, operation, and maintenance of your
CT-2500 or CT-2500/E Tool. Proper maintenance is vital to the continued trouble-free
operation of the tool. If you have a problem not covered in the manual, call:
The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended
as a guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results
or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For
specific dimensional requirements consult the factory. This publication is not to be taken as a license to operate under, or
a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.
Safety
Safety is essential in the use and maintenance of Panduit tools and equipment. This manual and
any markings on the tool provide information for avoiding hazards and unsafe practices related to
the use or service of this tool. Observe all of the safety information provided.
TOOL SPECIFICATIONS
CT-2500 or CT-2500/E
Battery Operated Crimping
Tools
CT-2500BC
Battery Cartridge
CT-2500CHR
Battery Charger
CT-2500CHR/E
Battery Charger for EU
OPERATION MANUAL
1-(888) 506-5400, Ext. 83255
Ask for one of our Tool Service Technicians
Weight (including battery)
Dimensions:
Crimping Time
Crimping Force
Stroke
Sound Level:
Ambient Temperature
Battery Type:
Output:
Capacity:
Charging time:
Output:
Input:
Output:
Input:
Page 2 of
CT-2500 and CT-2500/E
3.3 lbs. (1,5 kg)
11-3/4" L x 2-3/8" H x 3-1/8" W – with battery
[298 L x 60 H x 80 W] mm
2 seconds
1.7 tons (15 kN)
.35 (9 mm)
75 dB (A) at 39.3" (1 meter)
-4° F to +104° F (-20°C to +40°C)
Nickel Cadmium (Ni-Cd)
9.6 V
1.3 Ah
Approx. 40 minutes
(15 min. with fast charger)
7.2 V - 14.4 Volt DC
120 Volt AC, 50~60Hz
7,2 V – 14,4 Volt DC
230 Volt AC, 50~60Hz
10
Advertisement
Table of Contents
