NanoBridge
M3/M365/M9 Quick Start Guide
™
Installation Requirements
• 10 mm wrench
• 13 mm wrench
Installation
The installation instructions show the NanoBridge M9; however,
the same instructions apply to the NanoBridge M3 and M365.
1. Install the Feed Support Tube to the Dish Bracket using the
M8x50 Carriage Bolt, M8 Serrated Flange Nut, M6x15 Carriage
Bolt, and M6 Serrated Flange Nut.
2. Install the Dish Bracket to the Dish Reflector using the four
M6x12 Carriage Bolts and four M6 Serrated Flange Nuts.
2