Ubiquiti NanoBridge M3 Quick Start Manual page 6

NanoBridge M3/M365/M9 Quick Start Guide
™
5. Attach the Dish Assembly to the pole using the two M8 U-Bolts,
two Pole Bracket Clamps, and four M8 Serrated Flange Nuts.
Note:
Ø 1.25" - 2.2" pole.
6. Slide open the cover of the NanoBridge. Connect the
Ethernet cable to the Ethernet port of the NanoBridge. Secure
the Ethernet cable to the Feed Support Tube with the two
Plastic Straps.
Note:
used for all wired Ethernet connections and should be
grounded through the AC ground of the PoE.
4
The mounting assembly can accommodate a
Shielded Category 5 (or above) cabling should be