Advertisement
THE INFORMATION MODE
HOW TO USE THE STEREO SOUND SYSTEM
The console features an information mode that allows
you to select a unit of measurement for the console
and turn on or turn off the display demo mode. You
can also set the date and time.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
The display will
show the selected
unit of measure-
ment. To change
the unit of mea-
surement, press
the Speed increase button. To view distance in miles,
select ENGLISH. To view distance in kilometers, select
METRIC.
UHITS:
EHGLISH
SET
EU_{RE:HT
TIblE:
DEF'IO: OH
_Z: a_ : a4 eM
lq
nPR 2[IDq
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al-
though the buttons will not function. If the demo mode
is turned on, the word "ON" will appear in display while
the information mode is selected. To turn on or turn off
the demo mode, press the Speed decrease button.
You can also set the date and time. To set the date
and time, see step 5 on page 20.
To exit the information mode, remove the key from the
console.
This product has been designed specifically to work
with iPod and has been certified by the developer to
meet Apple performance standards. To play music or
audio books through the console's stereo speakers,
you must connect your iPod, MP3 player, CD player,
or other personal audio player to the console through
the audio jack or through the Integrated Universal
Dock for iPod. The Integrated Universal Dock for iPod
will charge your iPod while you use it.
To use the audio jack, locate the audio wire and plug it
into the audio jack near the speakers. Then plug the
audio wire into a jack on your MP3 player, CD player,
or other personal audio player. Make sure that the
audio wire is fully plugged in.
To use the Integrated Universal Dock for iPod, you
need an iFit Universal iPod Connector (not included).
Plug one end into the Integrated Universal Dock for
iPod near the speakers and the other end into your
iPod. Make sure that the iFit Universal iPod
Connector is fully plugged in. To purchase an iFit
Universal iPod Connector, call the telephone num-
ber on the front cover of this manual.
Next, press the Play button on your iPod, MP3 player,
CD player, or other personal audio player. Adjust the
volume on your personal audio player or press the
Volume increase and decrease buttons on the con-
sole.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face and not on the console.
22
Advertisement
