REMEHA Quinta 85 Technical Information page 40

Remeha Quinta 85
Fig. 10 Remeha Quinta with calorifier and DHW pump
04.W4H.HS.00002
Flow and return header installation
A flow and return header installation is shown in Fig. 11. The separated hydraulic
groupes have system pumps, controlled by a rematic -controller for example.
®
The controller monitors the conditions from each group and varies the heat output to
suit the demand. Because of the modulating boiler operation it runs most efficient. In
this type of installation you can use the heat output for DHW production and HTG at
the same time.
40