Introduction; Warranty Repairs And Shipping Information; Static-Safe Handling - Fluke 867B Service Manual

Service procedures in this manual should be performed by
qualified personnel only. To avoid electrical shock, do not
service this product unless you are qualified to do so.

Introduction

This chapter provides handling, cleaning, disassembly, and assembly instructions.

Warranty Repairs and Shipping Information

If your GMM is still under warranty, see the warranty information at the front of this
manual for instructions on returning the unit. To contact Fluke, call one of the following
telephone numbers:
USA and Canada: 1-800-44-FLUKE
(1-800-443-5853)
Europe: +31 402-678-200
Japan: +81-3-3434-0181
Singapore: +65-
Anywhere in the world: +1-425-356-5500
Or, visit Fluke's Web site at www.fluke.com.

Static-Safe Handling

The GMM contains components that are susceptible to damage from electrostatic
discharge (ESD). Follow these two rules for handling static-sensitive devices:
HANDLE ALL STATIC-SENSITIVE COMPONENTS AT A STATIC-SAFE WORK
AREA.
Use grounded static-control table mats on all repair benches, and always wear a
grounded wrist strap. Handle boards by their nonconductive edges only. Store plastic,
vinyl, and Styrofoam objects outside the work area.
STORE AND TRANSPORT ALL STATIC-SENSITIVE COMPONENTS AND
ASSEMBLIES IN STATIC-SHIELDING BAGS OR CONTAINERS.
Static-shielding bags and containers protect components and assemblies from direct
static discharge and external static fields. Store components in their original packages
until they are ready for use.
Warning
*
-276-6196
3
Maintenance

Introduction

3-1.
3-2.
3-3.
3-3