Arming; Exit Delay Timer; Regular Arming - Magellan MG-6060 User Manual

Arming

When your system is armed, it can respond to any breach in the protected zones by generating an alarm and by transmitting a report to
your Central Monitoring Station. Though the arming methods explained in this section pertain to arming through Magellan's keypad, the
system can also be armed using your remote control. See Remote Controls on page 8.

Exit Delay Timer

When you arm your system, it will trigger the Exit Delay timer to provide you with enough time to exit the protected area before your
system is armed. You can program the Exit Delay timer from 1 second to 255 seconds (default 45 seconds). Only the System Master
user can program the Exit Delay timer. To program the Exit Delay timer:
menu
If a delay zone is opened and then closed while the system is in Exit Delay mode, the Exit Delay timer will be reduced to 10 seconds.

Regular Arming

This method is used for the everyday arming of your system. All defined zones in the system must be closed (the green
in ON) to Regular arm the system. To Regular arm your system:
User code
12
Technical Manuals Online! - http://www.tech-man.com Technical Manuals Online! - http://www.tech-man.com
next
System
Master code
next ok
Exit delay
from 001 to
255 seconds
ok next ok
press
until
desired
tone
READY
User Guide
light