Access System Features By Phone - Magellan MG-6060 User Manual

Table of Contents

Access System Features by Phone

Due to Magellan's voice-assisted remote features, any touch-tone telephone can be turned into a keypad. Arm/disarm Magellan,

activate/deactivate Magellan's PGM outputs, record/listen to messages and even turn Magellan into a speakerphone all via your

telephone. Using detailed voice prompts to guide your way, remote access to your Magellan system is as easy as picking up the

telephone.

Please note the following:

•

The following instructions pertain to entering commands and/or data through your telephone's keypad. Therefore, whenever you are

instructed to perform an action and/or enter data, do so on your telephone's keypad.

•

Magellan will automatically hang up if no action is performed after 2 minutes.

•

Press the [ ] key at anytime to exit and have Magellan hang up.

•

When Magellan is in speakerphone mode, key [16] from the center keypad will flash rapidly.

Step 1: Call Magellan from any touch-tone telephone

If there is no answering service or machine, simply pick up your telephone and dial the number of the telephone line that

your Magellan console is connected to (usually your home number). If the telephone line that Magellan is connected to is

shared with an answering service or answering machine, you have to override the answering service or machine. To

override the answering service or machine:

Call

Magellan,

wait one or

two rings

and then

hang up

Step 2: Enter your user code

Use the same user code that you use with the Magellan console.

Technical Manuals Online! - http://www.tech-man.com

Wait 10

Call Magellan

seconds

again

User Guide

Table of Contents