Frequently asked questions
The message "Fault - 73" appears in the display.
Possible fault
The brew unit cannot reset to the
correct position.
64
Solution
– Take out and clean the brew unit.
See "Cleaning and Care - Brew unit".
– Push the coffee ejector of the brew
unit into the correct position.
– Set the brew unit aside and insert the
waste unit and the water tank.
– Close the door.
The brew unit motor will
automatically move to the correct
position.
– When the message "Fit the brew unit"
appears, open the door and insert all
parts into the machine.
– Close the door.
If the message still shows contact Miele
Technical Service.