Main Dispenser - Miele CVA 4062 Operating And Installation Instructions

Cleaning and care

Main dispenser

^ Pull the main dispenser all the way
down and pull the cover forward to
remove .
^ Turn the cover around, slide the
insert upward and out, and clean
both parts thoroughly.
^ Slide the insert back into the cover
until it clicks into place.
^ Pull the nozzles of the main
dispenser out.
46
^ Pull both rubber stoppers
clean the stoppers and nozzles
thoroughly.
^ Pull the air intake pipe
necessary. You can knead or blow
through the pipe to remove any
potential blockages.
Never use a sharp object to remove
blockages, this could damage the
parts.
^ Put the rubber stoppers back into
place.
^ After cleaning the nozzles of the main
dispenser, slide them back into the
machine firmly upward to ensure they
are securely in place.
^ Replace the cover and slide the main
dispenser up.
out and
out if