Advanced Settings; Setup Procedure - Onkyo TX-NR535 Advanced Manual

Advanced Settings

Setup Procedure

This unit allows you to configure advanced settings,
such as to reassign the input jacks and input selector, or
configure various speaker settings.
To configure advanced settings, select "Setup" in the Home
menu.
 Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN. To return to
the Home menu, press HOME.
18
■ Operation
1. Press RCV on the remote controller. Always press RCV
first to change the remote controller to RECEIVER mode
(the mode to operate this unit) since its mode may be
changed to operate another components.
2.
Press HOME. The Home menu is displayed on the TV
screen. The Home menu is also displayed when HOME
on the unit is pressed.
3.
Select "Setup" using the cursor buttons and press
ENTER.
Advanced Settings
4.
Select the target menu using the cursors buttons /
and then press ENTER.
5. Press / / / to select the desired item to configure the
settings.
⿠ When "ENTER" is displayed on the setting item,
press ENTER.
To save changes and finish the setting: Press HOME to
exit.