Composite (Composite Video Input); Digital Audio (Digital Audio Input); Sp Config (Speaker Configuration) - Onkyo TX-NR535 Advanced Manual

3. Composite (Composite Video Input)

It is possible to change assignment of input selector buttons and the COMPOSITE VIDEO
IN V1 to 3 jacks.
Setting Item Default Value
BD/DVD -----
CBL/SAT VIDEO 1
STB/DVR VIDEO 2
GAME VIDEO 3
PC -----
AUX FRONT
TV/CD -----

4. Digital Audio (Digital Audio Input)

It is possible to change assignment of input selector buttons and the DIGITAL IN COAXIAL
1 to 2/OPTICAL jacks.
Setting Item Default Value
BD/DVD COAXIAL 1
CBL/SAT COAXIAL 2
20
Setting Details
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to BD/DVD
button. If you do not assign a jack, select "-----".
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to CBL/SAT
button. If you do not assign a jack, select "-----".
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to STB/DVR
button. If you do not assign a jack, select "-----".
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to GAME button.
If you do not assign a jack, select "-----".
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to PC button.
If you do not assign a jack, select "-----".
You cannot change this setting.
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE
VIDEO IN jack can be assigned to TV/CD button.
If you do not assign a jack, select "-----".
Setting Details
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to BD/DVD
button. If you do not assign a jack, select "-----".
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to CBL/SAT
button. If you do not assign a jack, select "-----".
Setting Item Default Value
STB/DVR -----
GAME -----
PC -----
AUX -----
TV/CD OPTICAL
⿠ Supported sampling rates for PCM signals (stereo, mono) from a digital input (optical and coaxial) are
32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

5. Sp Config (Speaker Configuration)

Allows you to change the speaker configuration such as existence of subwoofer, crossover
frequency, and so on. Settings are automatically configured if you use the Automatic
Speaker Setup.
Setting Item Default Value
Subwoofer Yes
Front Small
Advanced Settings
Setting Details
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to STB/DVR
button. If you do not assign a jack, select "-----".
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to GAME
button. If you do not assign a jack, select "-----".
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to PC button. If
you do not assign a jack, select "-----".
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to AUX button.
If you do not assign a jack, select "-----".
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired
DIGITAL IN jack can be assigned to TV/CD
button. If you do not assign a jack, select "-----".
Setting Details
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Allows you to specify the size of the front
speakers. Specify the size according to a cone
diameter.
"Small": When the cone diameter is less than
6-1/2 inches (16 cm)
"Large": When the cone diameter is greater than
6-1/2 inches (16 cm)
⿠ The setting is fixed to "Off" if "Subwoofer" is
set to "No".