Onkyo TX-NR535 Advanced Manual page 43

■ The RI functions do not work
⿠ To use RI, you must make an RI connection and an
analog audio (RCA) cable between the component and
AV receiver, even if they are connected digitally.
⿠ While Zone 2 is selected, the RI functions do not work.
■ The functions System On/Auto Power On and Direct
Change do not work for components connected via RI
⿠ These functions do not work when Zone 2 is turned on.
■ When performing Automatic Speaker Setup, the
measurement fails and the message "Ambient noise is
too high." is displayed.
⿠ This can be caused by a malfunction in your speaker
unit. Check if the unit produces normal sounds.
■ The display is dark
⿠ Make sure that Dimmer function is not working. Press
DIMMER button and change the brightness level of the
display.
■ The following settings can be made for the
composite video inputs
⿠ While holding down the input selector button to
configure, press HOME once at a time until "Video ATT:
On" is appeared on the display. To resume the setup,
repeat the above described step until "Video ATT: Off" is
appeared on the display.
This setting is possible for input selectors assigned with
one of the video inputs "VIDEO 1" to "VIDEO 3" in "3.
Composite". If you have a game console connected to
the composite video input, and the picture is not very
clear, you can attenuate the gain.
Video ATT: Off: (default).
Video ATT: On: (Gain is reduced by 2 dB.)
■ If the picture on your TV/monitor connected to the
HDMI output(s) is unstable, try turning the DeepColor
function off.
⿠ To turn off the DeepColor function, press STB/DVR and
ON/STANDBY on the AV receiver simultaneously.
While holding down STB/DVR, press
repeatedly until "Deep Color:Off" is appeared on the
display. To reactivate the DeepColor function, repeat the
above described step until "Deep Color:On" is appeared
on the display.
The AV receiver contains a microPC for signal processing
and control functions. In very rare situations, severe
interference, noise from an external source, or static
electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet,
wait at least 5 seconds, and then plug it back in.
Onkyo is not responsible for damages (such as CD rental
fees) due to unsuccessful recordings caused by the unit's
malfunction.
Before you record important data, make sure that the
material will be recorded correctly.
Before disconnecting the power cord from the wall outlet,
set the AV receiver to standby.
ON/STANDBY
DISCLAIMER : Through this device you are able to link to
other services or websites which are not under the control
of any company which has designed, manufactured or
distributed/have distributed this device, and its affiliates
(collectively, "Company"). We have no control over the
nature, content and availability of those services. The
inclusion of any links does not necessarily imply a
recommendation or endorse the views expressed within
them.
All information, content and services available through
this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual
property laws of applicable countries.
The information, content and services provided through this
device are for your personal, noncommercial use only. Any
information, content or services may not be used in any
manner other than previously approved by the appropriate
content owner or service provider.
You may not modify, copy, republish, translate, exploit,
create derivative works, upload, post, transmit, sell or
distribute in any manner any information, content or
services available through this device, unless expressly
permitted by the appropriate copyright, patent, trademark
and/or other intellectual property owner, including, without
limitation, content owner or service provider.
THE CONTENT AND SERVICES AVAILABLE THROUGH
THIS DEVICE ARE PROVIDED "AS IS".
COMPANY DOES NOT WARRANT INFORMATION,
CONTENT OR SERVICES SO PROVIDED, EITHER
EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO, WARRANTIES OF TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Troubleshooting
43