Onkyo TX-NR535 Advanced Manual page 44

Company makes no representation or warranty of any kind,
express or implied, about the completeness, accuracy,
validity, legality, reliability, suitability or availability with
respect to the information, content or services available
through this device. Company shall not be liable, whether
in contract or tort, including negligence and strict liability,
for any direct, indirect, special, incidental or consequential
damages or any other damages arising out of, or in
connection with, any information contained in, or as a result
of the use of any content or service by you or any third
party, even if Company has been advised of the possibility
of such damages, nor shall Company be liable for any third
party claims against users of this device or any third party.
In no event shall Company be responsible nor liable
for, without limiting the generality of the foregoing, any
interruption or suspension of any information, content or
service available through this device.Company is neither
responsible nor liable for customer service related to the
information, content and services available through this
device.Any question or request for service relating to the
information, content or services should be made directly to
the appropriate content owners and services providers.
44
Reference Information
Linked Operation with CEC-compatible
Components
The AV receiver is compatible with the following
components (as of January 2014).
TV (Random order):
⿠ Toshiba TV sets
⿠ Sharp TV sets
Players/Recorders (Random order):
⿠ Onkyo and Integra RIHD-compatible players
⿠ Toshiba players and recorders
⿠ Sharp players and recorders (only when used together
with Sharp TV sets)
Models other than those mentioned above may have some
interoperability if compatible with CEC, which is part of the
HDMI Standard, but operation can not be guaranteed.
Note: For RI functions to work properly, do not connect more RIHD-
compatible components than the quantities specified below, to
the HDMI jack. RI functions are not guaranteed when more RIHD-
compatible components than the below mentioned quantities are
connected. Furthermore, do not connect the AV receiver to another
AV receiver/AV amplifier via HDMI.
⿠ Blu-ray Disc/DVD players: up to 3.
⿠ Blu-ray Disc/DVD recorders: up to 3.
⿠ Cable TV tuner, terrestrial digital tuner, and satellite broadcasting
tuner: up to 4 units.
Troubleshooting/Reference Information
Checking whether the HDMI Linked Operation
Settings Are Enabled
1. Turn on the power of all connected components.
2. Turn off the power of the TV, and confirm that the power
of the connected components is turned off automatically
with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD player/
recorder.
4. Start playback on the Blu-ray Disc/DVD player/recorder,
and verify the following:
⿠ The AV receiver automatically turns on, and selects
the input to which the Blu-ray Disc/DVD player/
recorder is connected.
⿠ The TV automatically turns on, and selects the input
to which the AV receiver is connected.
5. Following the operating instructions of the TV, select
"Use the TV speakers" from the menu screen of the TV,
and confirm that the audio is output from the speakers of
the TV, and not from the speakers connected to the AV
receiver.
6. Select "Use the speakers connected from the AV
receiver" from the menu screen of the TV, and confirm
that the audio is output from the speakers connected to
the AV receiver, and not from the TV speakers.
Note:
⿠ Even if you set to output audio on the TV speakers, audio will
be output from the speakers connected to the AV receiver when
you adjust the volume or switch the input on the AV receiver.
To output audio from the TV speakers, redo the corresponding
operations on the TV.
⿠ In case of an RIHD connection with RI and RI audio control
compatible components, do not connect the RI cable at the
same time.
⿠ On the TV, when you select anything other than the HDMI jack to
which the AV receiver is connected, the input on the AV receiver
will be switched to "TV/CD".
⿠ The AV receiver will automatically power on in conjunction
when it determines it to be necessary. Even if the AV receiver
is connected to an RIHD compatible TV or player/recorder, it
will not power on if it is not necessary. It may not power on in
conjunction when the TV is set to output audio from the TV.
⿠ Linked system functions with the AV receiver may not work
depending on the component model connected. In such cases,
operate the AV receiver directly.