When The System Malfunctions - Toyota 2016 RAV4 Owner's Manual

284
4-5. Using the driving support systems
●
The following situations may occur during use:
• Depending on the shape of the obstacle and other factors, the detection
distance may shorten, or detection may be impossible.
• Obstacles may not be detected if they are too close to the sensor.
• There will be a short delay between obstacle detection and indicator.
Even at slow speeds, there is a possibility that the obstacle will come
within the sensor's detection areas before the indicator comes on and the
warning beep sounds.
• Thin posts or objects lower than the sensor may not be detected when
approached, even if they have been detected once.
• It might be difficult to hear beeps due to the volume of audio system or air
flow noise of the air conditioning system.
■

When the system malfunctions


4 sensor type
●
If the vehicle indicator remains on while the rear corner and rear center indi-
cators flash and the malfunction beep sounds for approximately 7 seconds,
have the vehicle inspected by your Toyota dealer.
●
If the vehicle indicator and the rear corner and rear center indicators flash
and the malfunction beep sounds for approximately 7 seconds, clean the
sensors with soft cloth.

8 sensor type
A message is displayed on the multi-information display: P. 628
■
Customization
Setting of buzzer volume can be changed.
(Customizable features
■
Certification (Canada only)
This ISM device complies with Canadian ICES-001.
RAV4_OM_OM42A41U_(U)

P. 701)