Temporarily Lowering Sensor Sensitivity - Toyota 2016 RAV4 Owner's Manual

• There is a highly reflective object ahead of the vehicle, such as a sign or
a mirror.
• The back of a vehicle ahead is highly reflective, such as a container on a
truck.
• The vehicle's headlights are damaged or dirty.
• The vehicle is listing or tilting, due to a flat tire, a trailer being towed etc.
• The high beam and low beam are repeatedly being switched between in
an abnormal manner.
• The driver believes that the high beam may be causing problems or dis-
tress to other drivers or pedestrians nearby.
■

Temporarily lowering sensor sensitivity

The sensitivity of the sensor can be temporarily lowered.
1 Turn the engine switch off while the following conditions are met.
• The headlight switch is in
• The headlight switch lever is in high beam position.
2 Turn the engine switch to IGNITION ON mode.
3 Within 5 seconds after
original position then pushing it to the high beam position quickly 9 times,
then leave the lever in high beam position.
Automatic High Beam (headlights) may turn on even the vehicle is stopped.
■
If a warning message of the Automatic High Beam is displayed
It may indicate a malfunction in the system. Contact your Toyota dealer.
■
Customization
The Automatic High Beam can be turned off.
(Customizable features: P. 701)
RAV4_OM_OM42A41U_(U)
4-3. Operating the lights and wipers
.
2 , repeat pulling the headlight switch lever to the
219
4