282
4-5. Using the driving support systems
Setting up intuitive parking assist
You can change the buzzer sound volume and the screen operating
conditions.
Vehicles with Entune Audio
1
Press the "SETUP" button.
2
Select "Vehicle" on the screen.
3
Select "TOYOTA Park Assist Settings" on the screen.
4
Select the desired item.
Vehicles with Entune Audio Plus or Entune Premium Audio with
Navigation
1
Press the "APPS" button.
2
Select "Setup" on the screen.
3
Select "Vehicle" on the screen.
4
Select "TOYOTA Park Assist Settings" on the screen.
5
Select the desired item.
● The buzzer sound volume can be adjusted.
● On or off can be selected for intuitive parking assist display.
● Front or rear center sensors display and tone indication can be set.
■
The intuitive parking assist can be operated when
●
Front corner sensors:
• The engine switch is in the "ON" position (vehicles without smart key sys-
tem) or the engine switch is turned to IGNITION ON mode (vehicles with
smart key system).
• The shift lever is in a position other than P.
• The vehicle speed is less than approximately 6 mph (10 km/h).
●
Front center sensors:
• The engine switch is in the "ON" position (vehicles without smart key sys-
tem) or the engine switch is turned to IGNITION ON mode (vehicles with
smart key system).
• The shift lever is in a position other than P or R.
• The vehicle speed is less than about 6 mph (10 km/h).
●
Rear corner and rear center sensors:
• The engine switch is in the "ON" position (vehicles without smart key sys-
tem) or the engine switch is turned to IGNITION ON mode (vehicles with
smart key system).
• The shift lever is in R.
RAV4_OM_OM42A41U_(U)