Recall Procedure; To Stop The Position Recall Operation Part-Way Through; Operating The Driving Position Memory After Turning The Engine Off; If The Battery Is Disconnected - Toyota 2016 RAV4 Owner's Manual

■

Recall procedure

1
Check that the shift lever is in P.
2
Turn the engine switch to the "ON" position (vehicles without
smart key system) or IGNITION ON mode (vehicles with smart
key system).
3
Press one of the buttons for
the driving position you want
to recall until the buzzer
sounds.
■

To stop the position recall operation part-way through

Perform any of the following:
●
Press the "SET" button.
●
Press button "1" or "2".
●
Operate any of the seat adjustment switches.
■

Operating the driving position memory after turning the engine off

Recorded seat positions can be activated up to 180 seconds after the driver's
door is opened and another 60 seconds after it is closed again.
■

If the battery is disconnected

The memorized positions are erased.
WARNING
■
Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear
passenger or squeeze your body against the steering wheel.
RAV4_OM_OM42A41U_(U)
3-3. Adjusting the seats
145
3