Changing The Pre-Collision Warning Timing - Toyota 2016 RAV4 Owner's Manual

■

Changing the pre-collision warning timing

1
Press
on the multi-information display.
2
Press
and then press
3
Select "Sensitivity" and then press
Each time
tem will be changed.
The operation timing setting is retained when the engine switch is
turned off.
1
Far
The system functions will begin
to operate earlier than with the
default timing.
2
Middle
This is the default setting.
3
Near
The system functions will begin
to operate later than with default
timing.
RAV4_OM_OM42A41U_(U)
4-5. Using the driving support systems
or of the meter control switches and select
or of the meter control switches and select
.
is pressed, the operation timing of the pre-collision sys-
.
243
,
4