Toyota 2016 RAV4 Owner's Manual page 596

596
7-3. Do-it-yourself maintenance
6
Set the new light bulb.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn it clockwise to set.
7
Set the connector.
After installing the connector,
shake the bulb base gently to
check that it is not loose, turn
the fog lights on once and visu-
ally confirm that no light is leak-
ing through the mounting.
8
Reinstall the fender liner and
install the clip.
Insert the clip and turn to lock.
9
Reinstall the fender liner and
install the screws.
Make sure that the fender liner
is attached to the inside of the
bumper.
RAV4_OM_OM42A41U_(U)