The Blind Spot Monitor Function Is Operational When; The Blind Spot Monitor Function Will Detect A Vehicle When - Toyota 2016 RAV4 Owner's Manual

310
4-5. Using the driving support systems
■

The Blind Spot Monitor function is operational when

●
The Blind Spot Monitor system is set to on
●
Vehicle speed is greater than approximately 10 mph (16 km/h).
■

The Blind Spot Monitor function will detect a vehicle when

●
A vehicle in an adjacent lane overtakes your vehicle.
●
Another vehicle enters the detection area when it changes lanes.
■
Conditions under which the Blind Spot Monitor function will not detect a
vehicle
The Blind Spot Monitor function is not designed to detect the following types
of vehicles and/or objects:
●
Small motorcycles, bicycles, pedestrians, etc.
●
Vehicles traveling in the opposite direction
●
Guardrails, walls, signs, parked vehicles and similar stationary objects
●
Following vehicles that are in the same lane
●
Vehicles driving 2 lanes across from your vehicle
*
: Depending on conditions, detection of a vehicle and/or object may occur.
RAV4_OM_OM42A41U_(U)
*
*
*
*