Temporarily Lowering Sensor Sensitivity; If A Warning Message Of The Automatic High Beam Is Displayed - Toyota RAV4 Hybrid 2018 Service Manual

■

Temporarily lowering sensor sensitivity

The sensitivity of the sensor can be temporarily lowered.
1 Turn the power switch off while the following conditions are met.
• The headlight switch is in
• The headlight switch lever is in high beam position.
2 Turn the power switch to ON mode.
3
Within 5 seconds after
original position then pushing it to the high beam position quickly 9 times,
then leave the lever in high beam position.
Automatic High Beam (headlights) may turn on even the vehicle is stopped.
■

If a warning message of the Automatic High Beam is displayed

It may indicate a malfunction in the system. Contact your Toyota dealer.
■
Customization
The Automatic High Beam can be turned off.
(Customizable features: →P. 642)
RAV4-HV_OM_OM42B81U_(U)
4-3. Operating the lights and wipers
.
2
, repeat pulling the headlight switch lever to the
225
4