RECEIVER LCD PANEL DESCRIPTION
After turning on the "POWER" button, LCD screen will light up as below:
1. RF (radio frequency) Indicator
2. AF (audio frequency) Indicator
3. Current Channel/Frequency Display: current value depends on your setting.
If there is static or no sound coming out of your speakers, than
NOTE
there may be a frequency interruption from another system, change your
frequency to match your transmitter's (microphone) frequency.
HOW TO SELECT FREQUENCIES
This receiver has two built-in receivers (i.e. Receiver A and Receiver B). The
manufacturer has already pre-set a particular frequency for each channel. To
select the frequency, you can use either Receiver A or Receiver B and press
the upper button for selection. Selectiing frequencies at either Receiver A or
Receiver B will work. You can set up the same channel at both microphones
because the same channel can have different frequencies.
When you set up a particular frequency at Receiver A, you also need to set
the same frequency at the microphone. Please refer to the "Frequency Table"
on page 16.
AF
CH01:752.20 mh
RECEIVER - A LCD
1
AF
3
CH01:752.20 mh
RF
z
RF
z
AF
CH01:763.20 mh
RECEIVER - B LCD
5
2
RF
z