How To Insert Hand-Held Transmitter's Batteries - Better Music Builder VM-93C Operating Instructions Manual

HOW TO INSERT HAND-HELD TRANSMITTER'S BATTERIES

Step 1:
Slide open the closely tight battery cover a little bit hard because the
commercial and public use microphones are designed for tight close.
Step 2:
Use one hand to hold onto the top of your transmitter, with your other hand
inserting two rechargeable AA batteries into battery slot. Be careful not to
drop transmitter while inserting the batteries. The batteries are not under
product warranty. If the batteries are dead, replace with new batteries.
Make sure that you insert the battery at the right electric poles, as
NOTE
shown in picture. Otherwise, it would damage the rechargeable batteries
while they are recharging. The batteries are not under product warranty.
No Good
ALKALINE
AA
BATTERY
Step 3:
Slide back battery cover.
ALKALINE
BATTERY
ALKALINE
AA
BATTERY
ALKALINE
BATTERY
ALKALINE
BATTERY
12
AA
Good
ALKALINE
AA
BATTERY
ALKALINE
AA
AA
BATTERY
AA
ALKALINE
AA
BATTERY