Videx 4333 Kristallo Series User Manual page 9

DURING THE CONVERSATION
1 5 / 1 2 / 1 1
PTT
1 5 / 1 2 / 1 1 1 4 . 5 ° C
PTT
Fig.3b
During the conversation Fig.3:

To switch from hands free to push to talk mode, keep pressed the
to talk to the visitor (the LED flashes quickly) and release the button (the LED flashes slowly) to listen the visitor;

To open the door press the

To enable the secondary service keep pressed the

To enable the BUS relay Art.2305 (if connected on the pass) keep pressed the button
the BUS relay to enable by the buttons

To enter into programming menu press the
ADJUSTMENTS MENU
OSD
EXIT
OSD
EXIT
In the programming menu you can set:

The speech volume (8 levels Fig.4);

The picture brightness (8 levels Fig.4a);

The picture contrast (8 levels Fig.4b);

The picture hue (8 levels Fig.4c);
Adjust the selected option using the buttons
tions. With "EXIT" selected, press
PrtCode:66550045EN.doc – Pag.9/9
1 4 . 5 ° C 0 9 : 2 3
M E N U
Fig.3
0 9 : 2 3 1 5 / 1 2 / 1 1
PTT
M E N U
button Fig.3b;
button until the activation signals (call tone plus message) are received Fig.3c;
and and confirm with
button Fig.4.
Fig.4
Fig.4b
and then confirm by the button
to exit from the menu or
Two Wire Videokit ESVK Series
1 5 / 1 2 / 1 1
1 4 . 5 ° C 0 9 : 2 3
S R V
M E N U
Fig.3c
until the related LED starts to flash slowly Fig.3a. Keep pressed the
until the display shows the picture in figure 3d then select
button.
OSD
EXIT
OSD
EXIT
to move to next option or use the
do adjust other settings.
15/02/2013
1 4 . 5 ° C
PTT
Fig.3a
1 5 / 1 2 / 1 1 1 4 . 5 ° C
S E R V . - 1 + O K ?
PTT
Fig.3d
Fig.4a
Fig.4c
buttons to navigate the op-
0 9 : 2 3
0 9 : 2 3
M E N U
button
Rev.1.0