Garmin GHC Instructions Manual page 8

remote. For more information about manually steering your boat
with the autopilot, see the GHC Owner's Manual.
Select an option:
• Select
increments of 1°.
• Select
larger increments.
Activating a Wind Hold
Before you can activate a wind hold using the remote, you must
assign a wind hold to one of the programmable keys using the
GHC device
1
Select the programmable key assigned to wind hold.
The wind hold direction appears on the remote screen.
2
Select the programmable key assigned to wind hold again
to activate wind hold.
Adjusting the Wind Hold
When wind hold is engaged, you can manually adjust the wind
hold angle with the arrow keys on the remote.
Select an option:
• Select
increments of 1°.
• Select
larger increments.
Activating Route To
Before you can activate Route To using the remote, you must
assign Route To to one of the programmable keys using the
GHC device
1
Select the programmable key assigned to Route To.
"Route To" appears on the remote screen.
2
Select the programmable key assigned to Route To again to
activate Route To.
or
or
(page 5).
or
or
(page 5), and define a route on your chartplotter.
to manually adjust the heading in
to manually adjust the heading in
to manually adjust the angle in
to manually adjust the angle in
EN–8