Aux In Operation; Sleep Operation; Specifications; Care And Maintenance - Hyundai TR 1088 BT3BBL Instruction Manual

Sd/usb/radio portable player
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 31

AUX IN OPERATION

1.
Connect 3.5 mm cable to this unit and your device with 3.5 mm output jack.
2.
Press the "MODE" button until the system entered the AUX mode
3.
Press "
" on your device and enjoy.
Remark:
AUX mode will only appear when the unit connected with the 3.5mm jack cable (3.5
mm Aux-in cable not include)

SLEEP OPERATION

1.
Press the "
2.
Unit can also switch off anytime by press and hold the "

SPECIFICATIONS

General
Power Supply: AC100V - 240V~ 50/60Hz
DC: 4 x 1.5V 'C' (UM-2) Batteries (Not included)
Power Consumption: 4W
Standby Power Consumption: 0,18W
Output Power (RMS): 2 x 1W
Unit Dimensions: 182 x 170 X 90 mm
Radio
Tuning Frequency: FM: 87.5–108MHz

CARE AND MAINTENANCE

1.
Children should be supervised when using this appliance.
2.
Never wrap the earphone lead around any animal or person. Special care should be taken
with long wires.
3.
Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
4.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5.
Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.

TROUBLESHOOTING GUIDE

Symptom
Noise or sound
distorted on FM
broadcast
FM no sound
Sound appears
distorted at high
volume setting

BLUETOOTH OPERATION

1.
Press "FUNCTION" to enter bluetooth mode, "bt" will show on screen.
2.
Bluetooth indication will flash with blue light and start searching for device pairing.
3.
Switch on the bluetooth function on the device.
4.
Search for the unit named with "UC1088P-B", click it for pairing.
5.
Once connection success, the bluetooth indication blue light will always on.
6.
Open the music center apps to start playing music.
" button to set the auto switch off timer (90>80>70>60...10>OFF>)
Possible Cause
- Station not tuned properly for FM.
- FM telescopic antenna is not extended.
- Unit not in "FM" function mode.
- Volume set at minimum
- Volume control is set to
- maximum.
Unit Weight: 0.6 kg
- Retune the FM broadcast station.
- FM: Extend FM telescopic antenna.
- Press Function Switch to "FM" position.
- Increase Volume.
- Adjust Volume Control to a lower
EN - 38
" button
Solution
comfortable level.

Advertisement

Table of Contents
loading

Table of Contents