Electrical Connection; Insulating The Fireplace; Lining The Combustion Chamber - Stuv 21 Installation Instructions Manual

Electrical connection

Check fuses are disconnected before
any operation.
Connect the fan and the control and
then the control and the fuses.
Do not forget earth cabling.
The fan's electricity supply (two
conductors + earth) has to be
protected by a bipolar fuse.

Insulating the fireplace

If you install insulating materials
around the stove, cut the panel
to avoid obstructing the stove's
convection air inlets on the sides or at
the back of the stove.

Lining the combustion chamber

The primary air circulator
Place the primary air diffuser or check
its position (the diffuser's lugs fit into
slots designed to receive them) before
positioning the refractors [diagram
and fotos 1, 2 & 3].
Stûv 21 - installation [en] - 04-2013
28
SN 132150- ...
220-230 V
L M
1
1
3
2