Positioning Of The Stove; Connection To The Smoke Flue - Stuv 21 Installation Instructions Manual

Locating the glass protection and smoke outlet (continuation)
F
it the smoke outlet (high or low as
suitable) [photo 5 ou 6].

Positioning of the stove

Caution !
For perfectly smooth tilting of the
door, masonry must be level with the
base of the hearth opening [photo 1].

Connection to the smoke flue

The fitting of the various flue parts
must be air-tight to encourage
the dispersal of condensation
[diagram 1A] rather than that of the
smoke [diagram 1B].
In the case of a connection duct for
just one room, leave a gap of 2 mm/m
lengthways to allow for expansion.
5
1
3
6
2
1
A B
Stûv 21 - installation [en] - 04-2013
SN 132150 - ...
25