Fisher & Paykel Titan Aerotech OD302US Service Manual page 66

Service Manual 546596A: 302 Series Titan Oven
Door Outer Assembly
Handle removal
1. Remove the four handle retaining screws in the top corners of the outer door
assembly. (no.'s 9&11)
Reassembly
Refit in reverse manner.
Glass Pane removal
1. Remove the four screws securing the heat shield panel. (no. 4)
2. Loosen the four screws securing the bottom flow guide panel. (no. 6)
3. Slide the heat reflective glass pane out from the bottom flow guide panel. (no. 1)
Reassembly
Refit in reverse manner.
Figure 7.22b
66
June 2005