Vcr Reset; Rf Channel Tuning - Sharp VC-MH75HM Operation Manual

Module 25.fm Page 35 Monday, January 6, 2003 12:59 PM
MORE INFORMATION ABOUT YOUR VCR

VCR RESET

1.
STOP
Press the
2.
Press and hold
the VCR for 10 seconds.
Please continue with your previous procedure.

RF CHANNEL TUNING

If you have a preferred RF output channel this can be set manually between channels 21 and
69 by following the procedure below.
1.
Press the STANDBY
2.
Press and hold the
3.
Wait for a flashing channel number to appear on the VCR display.
4.
The channel number can now be changed by using the
5.
Your TV will now require tuning to the new
channel. (The screen opposite should be
displayed on the TV)
6.
Press the SET
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON. To do this press the
on the remote control at point 3 from RF CHANNEL TUNING above, or at point 4 of AUTO
TUNING on page 6. This will help minimise interference.
STOP
button on the front of the VCR.
MENU
MENU CHANNEL UP
and
✔
VCR RESET IS NOW COMPLETE
STANDBY
button.
MENU
MENU button for 3 seconds.
SET
button to store.
(White text
blue background)
www.sharp.co.uk/support
CHANNEL
buttons together on the front of
/ menu select buttons.
V CR R F
S E T : E N T E R
CLEAR
CLEAR button then the
35
ME NU : E X I T
SET
SET button