Playback Of A Video Tape; Checking The Amount Of Tape Remaining; Playing Back A Video Tape Repeatedly - Sharp VC-MH75HM Operation Manual

TINS-A724UMZZ.book Page 19 Monday, January 6, 2003 11:22 AM
ADVANCED OPERATION

PLAYBACK OF A VIDEO TAPE

CHECKING THE AMOUNT OF TAPE REMAINING

When you load a video tape into the VCR it can calculate approximately the amount of
video tape remaining in hours and minutes. This is useful in determining whether or not there is
sufficient tape left to make a recording. When a video tape is playing, the amount of tape
remaining is calculated for you automatically. To display the amount of video tape remaining:
1.
Load the video tape into the VCR
2.
Press the DISPLAY
"R" appears on the VCR display. The tape will wind forward and then return to its original
position. The tape remaining will be shown on the VCR display in hours and minutes. By
pressing the TAPE SPEED
change between extended play, long play and standard play. For example:
In standard play mode, 1 hour 23 minutes is left on the tape:
In long play mode, 2 hours 46 minutes is left on the tape:
In extended play mode, 4 hours 9 minutes is left on the tape:
NOTES:
• If tape remaining function is interrupted, the remaining time will not be displayed.
• If less than 5 minutes of tape remains the display will flash.

PLAYING BACK A VIDEO TAPE REPEATEDLY

You can set your VCR to automatically rewind at the end of playing a video tape and replay
the entire tape again. REPEAT will appear on the on-screen display when selected.
To use this feature:
1.
Press the MENU
menu on the screen.
2.
Press the [
select MODE.
3.
Press the SET
4.
Press the [
select REPEAT.
5.
[ / ] menu select buttons
Press the
6.
Press the SET
7.
Press the MENU
DISPLAY
button on the remote control as many times as necessary until
TAPE
button on the remote control the remaining time will
SPEED
MENU
button to display the main
/ ] menu select buttons to
SET
button.
/ ] menu select buttons to
SET
button to confirm and return to the main menu screen.
MENU
button to return to normal screen.
www.sharp.co.uk/support
MODE MENU SCREEN
B L U E MU T E
➝R E P E A T
: S E L E C T
S E T : E N T E R
to select ON.
19
AU T O O F F
ON O F F
: CHANGE
ME NU : E X I T