Specifications - Sharp VC-MH75HM Operation Manual

TINS-A724UMZZ.book Page 32 Monday, January 6, 2003 11:22 AM
MORE INFORMATION ABOUT YOUR VCR

SPECIFICATIONS

Format:
Number of heads:
Video signal system:
Maximum playing time:
Tape width:
Tape speed:
Antenna:
Reception channels:
RF output signal:
Power requirement:
Power consumption:
Operating temperature:
Storage temperature:
Video input:
Video output:
Audio input:
Audio output:
Hi-Fi audio:
Dimensions:
Weight:
Supplied accessories:
• Specifications are subject to change without notice as part of our policy
of continuous improvement.
• No liability is accepted for any inaccuracies or omissions in this
publication, although every possible care has been taken to make it
complete and as accurate as possible.
VHS PAL standard
Six
PAL colour or monochrome signal: 625 lines
240 min. with E-240 video cassette in Standard
Play (SP) mode
480 min. with E-240 video cassette in Long Play
(LP) mode
720 min. with E-240 video cassette in Extended
Play (EP) mode
12.7 mm
23.39 mm/s Standard Play (SP)
11.70 mm/s Long Play (LP)
7.8mm/s Extended Play (EP)
75 Ω unbalanced
UHF channel 21-69
UHF channel 21-69
AC 230-240V, 50 Hz
17 W approx. (Standby power consumption 2.5W)
5 ˚C to 40 ˚C
-20 ˚C to 55 ˚C
1.0 Vp-p, 75 Ω
1.0 Vp-p, 75 Ω
Line1&2: -3.8 dBs, 10 kΩ, Line3: -3.8 dBs, 47 kΩ
Line1&2: -3.8 dBs, 1 kΩ, Audio out: -3.8 dBs, 1 kΩ
Dynamic range: ~90dBs typ. (SP);
Frequency response: 20 Hz - 20 kHz;
Wow and Flutter: <0.005% Wrm (JIS A)
360(W) x 220(D) x 93(H) mm
2.6 kg (approx.)
75 Ω RF Connection cable, operation manual,
remote control, AA/R6/UM3 battery (x2)
www.sharp.co.uk/support
32