Other Features On Your Vcr Child Lock - Sharp VC-MH75HM Operation Manual

Hide thumbs Also See for VC-MH75HM:
Table of Contents

Advertisement

TINS-A724UMZZ.book Page 24 Monday, January 6, 2003 11:22 AM
OTHER FEATURES ON YOUR VCR
CHILD LOCK
You can lock your VCR with this feature. It will work even when the VCR is in STANDBY,
preventing children from operating the VCR.
TO ENGAGE CHILD LOCK
CHILD LOCK
Press and hold the
indicator flashes and then remains lit on the VCR display, confirming that CHILD LOCK
has been activated.
Regardless of what other operating buttons are touched, the VCR will continue to operate in
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
TO DISENGAGE CHILD LOCK
CHILD LOCK
Press and hold the
The
indicator starts flashing and then disappears. CHILD LOCK is disengaged.
NOTES:
If you attempt to change modes by pressing another button while CHILD LOCK is on,
the
indicator will flash on the VCR display.
If power is interrupted for more than 60 seconds (due to power failure etc), CHILD LOCK
may disengage.
button on the remote control for about 2 seconds. The
button for about 2 seconds.
www.sharp.co.uk/support
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents