Table of Contents
Advertisement
TINS-4009UMZZEnglish.book Page 36 Monday, November 12, 2001 12:14 PM
VCR RESET
1.
2.
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel, this can be set manually (21-69) by following the
procedure below:
1.
2.
3.
4.
5.
6.
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON by pressing the
remote control at point 3 of the
interference.
Downloaded from:
http://www.usersmanualguide.com/
Press the
STOP
button on the front of the VCR.
Press and hold
MENU
and the
seconds.
✔
VCR RESET IS NOW COMPLETE
Press the
button.
STANDBY
Press and hold the
button on the VCR front panel for 3 seconds.
MENU
Wait for a flashing channel number to appear on the VCR display.
The channel number can now be changed by using the
Press the
SET
button to store.
Your TV will now require tuning to the new
channel.
(White text with
blue background)
RF CHANNEL TUNING
CHANNEL DOWN
button together for 10
CHANNEL
S E T
: E N T E R
CLEAR
button then the
above. This will help minimise
GB-36
[
/
] buttons.
V CR R F
ME NU : E X I T
SET
button on the
Advertisement
Table of Contents
