Table of Contents
Advertisement
MORE INFORMATION ABOUT YOUR VCR
VCR RESET
1.
STOP
Press the
button on the front of the VCR.
2.
MENU
Press and hold
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel, this can be set manually (21-69) by following the
procedure below:
1.
Press the
STANDBY
2.
Press and hold the
3.
Wait for a flashing channel number to appear on the VCR display.
4.
The channel number can now be changed by using the
5.
Press the
SET
button to store.
6.
Your TV will now require tuning to the new
channel.
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON by pressing the
remote control at point 3 of the "
interference.
CHANNEL DOWN L
and the
✔
VCR RESET IS NOW COMPLETE
button.
MENU
button on the VCR front panel for 3 seconds.
(White text with
blue background)
CLEAR
RF CHANNEL TUNING
GB-32
button together for 10 seconds.
CHANNEL
[
V CR R F
S E T
: E N T E R
button then the
SET
button on the
" above. This will help minimise
K
L
/
] buttons.
ME NU : E X I T
Hide quick links:
Advertisement
Table of Contents
