Table of Contents
Advertisement
TINS-A083UMZZEnglish.book Page 37 Monday, November 11, 2002 9:39 AM
MORE INFORMATION ABOUT YOUR VCR
VCR RESET
1.
STOP
Press the
2.
Press and hold
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel, this can be set manually (21-69) by following the
procedure below:
1.
Press the
2.
Press and hold the
3.
Wait for a flashing channel number to appear on the VCR display.
4.
The channel number can now be changed by using the
buttons.
5.
Press the
SET
6.
Your TV will now require tuning to the new
channel.
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON by pressing the
remote control at point 3 of the
interference.
button on the front of the VCR.
CHANNEL UP K
MENU
and the
✔
VCR RESET IS NOW COMPLETE
STANDBY
button.
MENU
button on the VCR front panel for 3 seconds.
button to store.
(White text with
blue background)
CLEAR
RF CHANNEL TUNING
GB-37
buttons together for 10 seconds.
MENU SELECT
[
V CR R F
S E T
: E N T E R
ME NU : E X I T
button then the
SET
button on the
above. This will help minimise
K
L
/
]
Advertisement
Table of Contents
