Advanced Operation Audio And Your Vcr - Sharp VC-MH75HM Operation Manual

Module 08F.fm Page 17 Monday, January 6, 2003 12:38 PM
ADVANCED OPERATION
AUDIO AND YOUR VCR
HI-FI STEREO SOUND
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
AUDIO
AUDIO OUT
OUT
AUDIO OUT
can use the
• Press the AUDIO OUT
speakers. q q
q q
AUDIO OUT
• Press the
speakers. w w w w
• Press the AUDIO OUT
speakers. q q q q
• Pressing the AUDIO OUT
heard. q q and
q q
NICAM Hi-Fi STEREO SOUND
Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the
procedure below:
1.
Press the MENU
menu on the screen.
2.
Press the [
select MODE then press the
confirm.
• The MODE menu will be displayed with NICAM selected.
3.
[ / ] menu select buttons to select OFF.
Press the
4.
SET
Press the
5.
MENU
Press the
NOTES:
• If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R
will not appear on the display.
• lf the sound contains 'crackling' or 'popping' noises the sound quality may be
improved by adjusting the tracking using the
• If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.
• NICAM sound may not be stereo.
button on the remote control. If you wish to change the sound output you
AUDIO
button as follows:
OUT
AUDIO
button once. The LEFT audio channel will be sent to BOTH
OUT
will appear on the VCR display.
AUDIO
button again. The RIGHT audio channel will be sent to BOTH
OUT
will appear on the VCR display.
AUDIO
button a third time and the MONO track will be sent to BOTH
OUT
and w w w w will not appear on the VCR display.
AUDIO
button a fourth time, normal Hi-Fi stereo sound will be
OUT
w w will appear on the VCR display.
w w
MENU
button to display the main
/ ] menu select buttons to
SET
SET button to
SET
button to confirm and return to the main menu screen.
MENU
button to exit to normal screen.
www.sharp.co.uk/support
➝N I CAM
CO L OUR
CHANNEL
K
CHANNEL /
L
CHANNEL
17
AU T O O F F
AU T O P A L
buttons.