Wolf MGK-2-390 Installation Instructions Manual page 33

Overview AM
Quick start buttons
Button 1
Button 2
Button 3
Button 4
Button 1
Button 2
Button 3
Button 4
3063772_201507
20. AM display module
Note:
If your Wolf heating appliance does not have an AM display module,
ignore this page.
Other functions and descriptions can be found in the installation
instructions for contractors or the user operating instructions for the
AM display module.
Status display
Operating mode
Heating mode
Burner status
ON
Burner ON
Heating appliance pump ON
Heating appliance set temperature
(if BM2 as remote control - no function)
DHW set temperature
(if BM2 as remote control - no function)
Enable emissions test mode
(for chimney sweep only)
Acknowledge fault / End / Back
Status
Heating appliance in heating mode
Rotary selector
with push-button
function
33