Table of Contents
Advertisement
Maintaining the solid plates
o If something is spilt onto the plate itself, then it can be removed
using a soft brush, plastic or nylon scourer and warm water.
o To keep the solid plates in good condition, you should put a little
olive oil onto a kitchen towel and rub it onto the surface of the
plate. The next time the plate is used, it may produce a little
smoke.
o Alternatively you can use a hotplate conditioner; these products
can normally be found at larger supermarkets and hardware
stores. The manufacturer's instructions should be followed when
using these products.
o IMPORTANT: If the solid plates are not maintained
regularly with olive oil or a hotplate conditioner, then they
may rust.
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European
Norm Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
13
Advertisement
Table of Contents
