Bang & Olufsen BEOLINK Handbook page 25

MASTER LINK 21
Option 4 mentioned above can also be used if there are no walls separating a
link room and a main room, and the product positioning in these rooms
means that operation in one of the rooms leads to operation in another
room. By setting the link room products to option 4 you allow the rooms to
be used independently of one another, as a link room product set to option
4 only receives information from the remote control if the link key is
activated.
Main room Link room
OPTION 1
OPTION 4
NB!
The BeoLink Video CANNOT be set to option 4!
Link room Link room
OPTION 4
OPTION 6
All link room products and link room kits using the Master Link connection
can be used in this type of setup – with the exception of BeoLink Video.
NB!
BeoLab 3500 must be equipped with software version 1.1 or higher.