Bang & Olufsen BEOLINK Handbook page 13

Contents
Use
Type number
Miscellaneous
BeoLink Converter
BeoLink Converter consists of a control box and a mains cable.
1.5m
BeoLink Converter is used to connect an audio and a video system where
one system is based on Master Link and the other on Datalink
(Audio Aux Link).
BeoLink Converter can be used both with an audiomaster and a
videomaster. BeoLink Converter has autoconfiguration, which means that it
can automatically decide if it is in a Master Link video system or in a
Master Link audio system. Configuration takes place after mains
connection.
BeoLink Converter can also be used as an ML driver*, which means that it is
possible to connect e.g. a BeoCenter 2300 via the BeoLink Converter to the
Master Link and thereby distribute the sound to all link room products
(see page 17).
BeoLink Converters are used in compatibility setups (see section on
recommended compatibility setups, page 17).
1160966 (KOR)
1161166 (EU)
1161266 (USA/CDN)
1161466 (old version)
In addition to the accessories supplied, the installation also requires a
Master Link cable and plugs, sockets and junction boxes (see also section on
installation types, page 23).
* NOTE!
BeoLink Converter, type no. 1161466 cannot be used as an ML driver.
MASTER LINK 9